China Electric Motor Drive Axle Bus Parts Rear Axle Half Shaft drive shaft center bearing

Item Description

The illustration of Rear Axle

 

Suspension Design

AR115

 

 

Rated load(kg)

115000

Brake Kind

Disc/Drum

Rim Length(mm)

1832

Max out Torque(Nm)

30000

Distribution Circle

ten*335

Flange Kind

Simple Flange

Ratio

3.15~6.seventeen

Applicable Bus

7m Bus

Wheel Hub Kind

Bearing Unit

Excess weight(oil incorporated)(kg)

690()Drum)/630(Disc)

The Comprehensive Drawing of Defined Rear Axle

Sort: Entrance AXLEAF 2.2~2.7                                                                                                   Kind: Entrance AXLE–AF 5.five

Application: five~7 m Coach/Town Bus                                                                                               Software: 10~eleven m Mentor/Town Bus

                                                                  

Variety: Entrance AXLE–AF 75                                                                                            Type: REAR AXLE–AR forty

Software: Above 11 m Coach/Metropolis Bus                                                                       Application: 5~8m Mentor/City Bus
Financial system of The Axle and Suspension

In get to enhance the axle and suspension high quality, improve client vehicle expertise, reduce soon after-product sales routine maintenance charges, totally discover from domestic and overseas superior axle technologies, specially in the axle wheel edge distinctive innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance totally free axle ans suspension wheel edge, in contrast with the prior technology, there is a qualitative leap. Between them, there are 2 types of servicing-cost-free wheel edge: oil lubrication routine maintenance-free of charge (typically five hundred,000 km routine maintenance-free) and built-in maintenance-cost-free (particularly bearing unit, 5 a long time / 800,000 km upkeep-free of charge).

Organization Profile

 DUOYUAN Automobile Equipment CO.LTD

Duoyuan car gear, handles an spot of far more than 100 acres and has in excess of 300 workers, including much more than ninety pros and technical personnel, much more than ten senior engineers, and a lot more than thirty intermediate engineers.

Our objective is to turn into the third get together specialist automobile elements provider with revolutionary spirit and top technological innovation. With ongoing design and development for sixteen years, we have cooperate with YuTong Team for a time period method. Present product industry volume: Above four hundred,000 pieces of bus particular axles, over 250,000 kits of bus air suspensions annual creation potential: one hundred,000 parts of bus unique axle and fifty,000 kits of bus air suspensions. In 2018, our product sales exceeded RMB 1.5 billion.

At present, our goods are mainly bus-oriented, offering matching products to entire ranges of designs this kind of as passenger bus, vacationer bus, group bus, community transportation bus, university buses and new power bus Also, we are actively increasing truck and other commercial car markets. Our merchandise are marketed to a lot more than a hundred thirty countries and areas in the globe such as Cuba, Venezuela, Russia, Iran and Saudi Arabia as elements of complete motor vehicle.

In get to recognize a better future, we, by upholding the spirit of exploration, discover extensively from others’ strong factors and take in overseas and domestic superior encounter, and try for the growth of China’s automotive products.

FAQ

Q:Are you trading firm or producer?

A: We are manufacturing unit who have been specializing in designing and production axle and suspension for 20 several years .
Q:Can your products be tailored or modified?

A: We can design and style and produce the axl and suspension according to customers’ demands and car parameters .
Q: What is your terms of payment ?
A: a hundred% Progress payment by T/T right after signing the agreement.
Q: What is your conditions of packing?
A: Generally, we set buggy axle on Wood pallets,Stretch movie fixed in wood box . Or Buyer needed.
Q: How lengthy is your delivery time?
A: Normally it is fifteen-twenty five days if the goods are in inventory. or it is 35-45 times if the items are not in inventory, it is in accordance to
quantity.
Q: What is your axl sample policy?
A: We can source the buggy axle sample if we have all set elements in stock, but the consumers have to spend the sample price and he courier value.Please make contact with with me with buggy axle.
Q. Do you test all your buggy axle before shipping?
A: Indeed, we have one hundred% take a look at before supply
Q: How do you make our business long-term and great partnership?
A:1. We hold axle and suspension a excellent top quality and aggressive price to ensure our clients benefit
2. We respect each customer as our pal and we sincerely do organization and make friends with them, no make a difference the place they occur from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
air-compressor

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China Electric Motor Drive Axle Bus Parts Rear Axle Half Shaft     drive shaft center bearing		China Electric Motor Drive Axle Bus Parts Rear Axle Half Shaft     drive shaft center bearing
editor by czh 2023-01-16